Re-selection spiral chute diagram

Re-selection spiral chute diagram

Re selected spiral chute Figure 1: Introduction: Spiral chute combines the characteristics of spiral chute, fiberglass spiral chute, shaker, and centrifugal gold concentrator. After scientific research organized by the Ministry of Metallurgy, operation and appraisal by departments such as design, universities, and concentrators, it is recognized that the equipment has excellent performance, advanced sorting objectives, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgy Industry. It has been widely used in non-ferrous and black mining metals. This machine can be used to separate iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosgenite, wolframite, placer tin, tantalite, tantalum niobium ore or other nonferrous metals, rare mineral metals and nonferrous metal minerals with different density and specific gravity. 2、 The method of use is to erect the glass fiber reinforced plastic spiral chute, calibrate the vertical line, fix it in an appropriate position with an iron frame or wood, send the ore sand to the two ore feeding ports above the spiral by the sand pump, mix in the make-up water, and adjust the concentration of the ore slurry. The mineral mortar naturally rotates from high to low, generating a single coherent centrifugal force in the flow speed of the back rotating inclined surface, and then get the difference in the specific gravity, Granularity and state of the sand, Through the effect of gravity and centrifugal force obtained through swirling flow, the sand ore is separated, and the concentrate flows into the beneficiation hopper and is connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand pit through pipelines, and then discharged by a slurry pump, completing the entire beneficiation process. Figure 3: Advantages and Features of the Gravity Separation Spiral Chute: 1. High efficiency, high recovery rate, and correct mineral sorting; 2. No power required; 3. Small weight, rust proof, wear-resistant, and not easily corroded; 4. Low operating cost and long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The friction formed by the surface of 6 diamond sand makes the beneficiation efficiency better than that of other plastic surfaces. The re selected spiral chute diagram 4. The structure of the spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, sturdy, and long-lasting consumer goods that are not easily damaged. The spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is easy to operate. There is no need to restrict the stacking of mineral sievers on the cross (or tripod) of the support table. The evenly distributed mineral mortar is slowly fed to the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type new product selection groove, which allows the sorting equipment to be divided into three categories (or four types) of new products according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows. The cross section and slope of the curve of the fiberglass chute are very suitable for the selection of fine particle materials. 5、 Applicable field The spiral concentrator is suitable for separating fine grained iron ore, ferrotitanium ore, chromite ore, pyrite ore, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and nonferrous metal minerals with sufficient density ratio difference. Re-selection spiral chute diagram Re-selection spiral chute diagram

Re-selection spiral chute diagram