Design of Spiral Chute Beneficiation

Design of Spiral Chute Beneficiation

Design of Spiral Chute Beneficiation: 1. Description: The spiral concentrator combines the characteristics of spiral chutes, spiral chutes, shakers, and centrifugal gold concentrators. After being evaluated by relevant scientific research, design, schools, or concentrators organized by the Ministry of Metallurgy, it is believed that this type of mechanical performance is excellent, the separation indicators are advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This equipment is suitable for sorting iron ore, ferrotitanium, ferrochrome, pyrite, zircon, Rutile ore, monazite ore, phosphate ore, wolframite, tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals and non-metallic mineral bodies with density and specific gravity difference of fine materials with a Granularity of 0.3-0.02 mm. 2、 Working principle: The spiral ore separator does not need to be limited to stacking on the cross (or tripod) of the support table. The same mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the beginning of the rotating groove, and selected for operation. The bottom is equipped with a valve block type equipment cutting groove, which divides the sorted products into three (or four) categories according to grade along the radial direction. Change the selection width of each equipment by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that enables the diverse mineral flows obtained to converge and export differently. The transverse plane of the fiberglass spiral chute and the slope of the curve change, making it particularly suitable for the selection of small particle materials. Design of spiral chute beneficiation III. Characteristics This product is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphorus ethylene, tungsten ore, sand tin, tantalum, niobium ore and other non-ferrous metal, rare metal and non-metallic ore bodies with density and specific gravity difference of 0.3-0.02MM fine materials. This equipment also has advantages such as stable and easy operation in the selection process, a wide range of allowable changes in feed density, high enrichment ratio, high recovery rate, small footprint, low water consumption, simple structure, no need for power, strong processing ability, easy installation and operation, low investment, and quick effectiveness. The design of spiral chute beneficiation is . The structure of the fiberglass chute is composed of a feeding device, a cross (tripod), a feeding trough, a rotating trough, a receiving trough, a gathering hopper, and a trough support. 5、 The spiral chute is suitable for processing 0.6-0.03MM and this vein and sand ore, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used for processing iron ore, tungsten, tin ore, tantalum and niobium, beach and riverside mineral sand and sand gold. Design of Spiral Chute Beneficiation Design of Spiral Chute Beneficiation

Design of Spiral Chute Beneficiation