Manufacturing method of anti crushing spiral chute

Manufacturing method of anti crushing spiral chute

The first method of making the shatterproof spiral chute is to explain that the spiral chute is a combination of the characteristics of the spiral concentrator, gravity separation spiral chute, shaking table and gold concentrator. Through the relevant scientific research organized by the Ministry of Metallurgical Industry, the design, universities, concentrators and other units have passed the operation appraisal. It is recognized that the mechanical performance is excellent, the separation goal is advanced, and it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and Ferrous mines. This equipment is used to separate iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metal ores, rare metals and non-metallic minerals with gravity difference from fine materials with a particle size of 0.3-0.02 mm. 2、 Technical principle: The fiberglass spiral chute separator can be freely placed on a cross (or tripod) on a support table. Equal slurry is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove, and sorting is carried out. The tail is equipped with a valve type product selection slot, which divides the selected equipment into three (or four) categories according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. The manufacturing method of the anti crushing spiral chute is three advantages and features: 1. It is stable, easy to control, and has a large concentration range. 2. Strong production and processing capacity of mineral materials, ultra-high enrichment ratio, and high recovery probability. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Easy to install, easy to operate, minimal investment, and fast recovery of benefits. The production method of anti crushing spiral chutes 4. Classification According to the particle size of the processed ore, chutes can be divided into three types: (1) Coarse grained spiral chutes, with a maximum particle size of 2-3mm or more for ore feeding and a maximum of 100-200mm. (2) Sand ore chute, processing 2-3MM particle grade ore. (3) Slurry spiral chute, feeding Granularity<0.074mm. 5、 The use of a field spiral concentrator is suitable for processing 0.6-0.03 millimeters or vein ore and this sand, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used in the processing of iron, tungsten, sand tin, tantalum niobium, coastal or riverside sand mines, as well as sand gold mines. Manufacturing method of anti crushing spiral chute Manufacturing method of anti crushing spiral chute

Manufacturing method of anti crushing spiral chute