Spiral chute assembly video

Spiral chute assembly video 1. Introduction: Chute sorting belongs to the inclined surface flow sorting process. Mineral mortar is fed to some inclined grooves or slopes, and under the push of water, the mineral particle group is loose and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After obtaining the difference, the selected ore and tailings can be obtained. Spiral chutes are machines for mining and beneficiation, making them ideal for sand mining in coastal areas, riverbanks, sandbanks, and river beds. The product has the characteristics of correct structure, simple installation, small land occupation, easy operation, stable beneficiation, clear screening of ore, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion resistance, and strong applicability to fluctuations in feed volume or density, Granularity, and grade. 2、 The mortar with the same working principle is slowly fed onto the surface of the spiral groove through the feeding chute installed at the end of the rotating groove head, and selected for operation. The tail of the rotating groove is equipped with a valve block type product cutting groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper enables the selected multi head ore flow to converge and export separately. The cross-section of the spiral chute and the slope of the curve change greatly, which is applied to the selection of fine ore materials. Video of Assembly of Spiral Chute 3. Advantages and Characteristics: 1. High efficiency, high recycling probability, and correct mineral sorting; 2. No power required; 3. Small weight, anti rust, durable, anti wear, and strong corrosion resistance; 4. Low operating cost and long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. Spiral chute assembly video 4. According to the processed ore particle size, the chute can be divided into three categories: (1) Coarse particle spiral chutes, with a maximum ore particle size of 2-3 millimeters or more, and a maximum of 100-200mm. (2) Mineral sand chute, processing 2-3 mm particle size mineral materials. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03MM and vein or placer ores, but it is unfavorable for sorting when the mud content is high. Now it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside ore sands, and gold mines. Spiral Chute Assembly Video Spiral Chute Assembly Video