Coke spiral chute

Coke spiral chute 1. Describing the chute beneficiation process that includes inclined surface flow separation steps. The slurry is fed into a inclined chute or slope, and under the push of water, the mineral particle group is loose and layered. The lighter minerals in the upper layer quickly flow out of the groove, while the minerals in the lower layer with a higher specific gravity stay inside the groove or discharge from the bottom at a low speed. After being extracted, the concentrate and tailings are obtained. The spiral concentrator is an equipment for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, beaches, and streams. The equipment has the characteristics of appropriate structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large output, high efficiency, high enrichment ratio, high recycling rate, and reliable operation. There are also advantages such as small weight, moisture resistance, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume or concentration, particle size, and grade. 2、 Technical principle: The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. Coke Spiral Chute III. Advantages and Characteristics 1. High efficiency, high recovery rate, and correct ore sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Coke spiral chute 4. Structural composition: The spiral chute is composed of a feeding homogenizer, a cross (tripod), a feeding trough, a spiral trough, a cutting trough, a gathering hopper, and a trough pillar. 5、 Applicable fields The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Coke spiral chute Coke spiral chute