Small spiral gold chute

Small spiral gold washing chute 1. Overview of chute sorting, including inclined flow sorting process. The slurry is fed to a inclined groove or inclined surface with a certain inclination. With the assistance of flowing water, the ore particles are loose and layered. The upper layer of light mineral materials are quickly discharged to the outside of the groove, while the lower layer of minerals with a larger proportion are stagnant inside the groove or slowly discharged from the lower part. After the difference is connected, the selected ore and tailings can be obtained. Spiral chutes are mining and beneficiation machinery, making them ideal for sand mining and beneficiation in coastal areas, rivers, beaches, and streams. The product also has the characteristics of suitable structure, simple installation, small footprint, easy operation, stable beneficiation, clear beneficiation, strong processing capacity, high efficiency beneficiation concentration ratio, high recovery rate, and stable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume or density, Granularity, and grade. 2、 The uniform working principle of the mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected variable ore flow to be differentiated and converged for export. The cross-section of the spiral chute and the slope of the curve change, which is very suitable for the sorting of small particle materials. Small spiral gold panning chute 3. Features This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum niobium ore, tantalum niobium ore or other colored metal, rare ore metal and nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02mm. This equipment has the advantages of stable sorting steps, easy operation, wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small area occupation, low water consumption, simple structure, no power, strong processing ability, simple installation, easy operation, small investment, and quick effectiveness. The small spiral gold panning chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, an equipment cutting groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The selected surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of being lightweight, sturdy, durable, and not easily damaged consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The concentrator is not limited to being placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding chute at the head of the rotating groove for sorting. The tail of the rotating groove is installed in a valve type new product selection groove, and the selected new products are divided into three types (or four types) of new equipment along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted multi-directional mineral flow to converge and lead out. The cross section of the spiral chute and the different slopes of the curves are very suitable for sorting fine particle materials. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethylene, tungsten, tin ore, tantalum ore, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and proportion. Small Spiral Gold Chute Small Spiral Gold Chute