Plastic spiral chute manufacturer

Plastic spiral chute manufacturer

Introduction to Plastic Spiral Chute Manufacturer 1: Chute beneficiation includes inclined surface flow separation process. The slurry is fed to a partially inclined chute or inclined surface, and with the assistance of water flow, the mineral particle group becomes loose and layered. The light minerals on the upper part are quickly discharged to the outside of the chute, while the heavier minerals on the lower part stagnate in the inner chute or slowly discharge from the lower part. After obtaining each, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and beneficiation, making them ideal for sand mining by the sea, riverbanks, sandbanks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, high processing yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. It has the advantages of light weight, moisture-proof, rust prevention, corrosion prevention, strong adaptability to the fluctuation of feed volume and density, Granularity, and grade. 2、 The production principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, implementing sorting. The bottom of the rotating groove is equipped with a valve block type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows for the differentiation and aggregation of the obtained variable mineral flow. The cross-section of the spiral chute and the slope change of the curve are very suitable for the selection of fine particle materials. Plastic spiral chute manufacturer 3. Features This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, sand tin, tantalum niobium, tantalum niobium and other non-ferrous metal ore bodies with different density and specific gravity of small materials with Granularity of 0.3-0.02mm. This machine has advantages such as stable sorting process, easy control, wide range of ore concentration tolerance, high enrichment, high recovery probability, small land occupation, low water consumption, simple structure, no need for power, large production capacity, simple installation, simple operation, small investment, and quick effectiveness. Plastic spiral chute manufacturer 4. Structural composition: The fiberglass chute is composed of six parts: a feeding distributor, a feeding groove, a rotating groove, an equipment cutting groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The selected surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of being lightweight, sturdy, durable, and not easily damaged consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The concentrator is not limited to being placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding chute at the head of the rotating groove for sorting. The tail of the rotating groove is installed in a valve type new product selection groove, and the selected new products are divided into three types (or four types) of new equipment along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted multi-directional mineral flow to converge and lead out. The cross section of the spiral chute and the different slopes of the curves are very suitable for sorting fine particle materials. 5、 Application field The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Plastic spiral chute manufacturer Plastic spiral chute manufacturer

Plastic spiral chute manufacturer