Gravity gray iron selection spiral chute

Gravity gray iron selection spiral chute

Gravity gray iron sorting spiral chute 1. Introduction: The chute sorting belongs to the slope flow sorting process. Mineral mortar is fed to a partially inclined chute or inclined surface, and with the assistance of water, the mineral particle group becomes loose and layered. The upper layer of light minerals quickly exits the outside of the chute, while the lower layer of heavy minerals stays inside the chute or flows out at low speed from the bottom. After differentiation, the selected ore or tailings are obtained. Spiral chutes are machinery for mining and mineral processing, making them particularly ideal for mining sand deposits in bays, rivers, sandbanks, and streams. The equipment has the characteristics of correct structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to the fluctuation of feed volume, density, Granularity, and grade. 2、 The mineral mortar with the same technical principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type equipment selection groove, which divides the sorted products into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each device, the product gathering hopper allows the intercepted variable mineral flow to be converged and exported separately. The transverse plane of the fiberglass spiral chute is particularly suitable for the separation of fine ore materials when the slope of the curve changes. Gravity iron separation spiral chute 3. Special features This machine is suitable for separating 0.3-0.02MM fine materials to obtain iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosgenite, tungsten ore, sand tin, tantalite, niobium ore and other non-ferrous metals, rare mineral metals and non-metallic mineral bodies with gravity differences. This machine also has advantages such as stable selection steps, easy operation, wide range of allowable changes in feed density, high enrichment ratio, high recovery rate, small footprint, low water consumption, simple structure, no need for power, large processing capacity, easy installation, easy operation, low investment, and fast efficiency. Gravity ash iron separation spiral chute 4. The structure of the spiral concentrator consists of a feeding average device, a cross (tripod), a feeding groove, a spiral groove, a selection groove, a gathering bucket, and a groove pillar. 5、 Use This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum niobium, niobium with a particle size of 0.3-0.02mm and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. Gravity gray iron selection spiral chute Gravity gray iron selection spiral chute

Gravity gray iron selection spiral chute