current location: home > News and information > Reselection of knowledge
update date :2023-07-26 15:44:22Number of views: author:huang
The size range of the spiral chute for sand washing gold is 1. Overview. The chute selection belongs to the slope flow selection step. Mineral mortar is fed to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral material on the lower part is stagnant inside the groove or flows out at a low speed from the lower end. After being connected, the selected ore or tailings are obtained. The spiral concentrator is a mechanical device for mining and beneficiation, making it ideal for sand mining in coastal, river, sand beach, and stream beds. The product has the characteristics of appropriate structure, easy installation, small land occupation, easy operation, stable beneficiation, clear mineral separation, high yield, high-efficiency beneficiation, ultra-high enrichment ratio, high recycling rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion resistance, and strong applicability to fluctuations in feed volume and density, Granularity, and grade. 2、 The spiral chute shall be set up by means of method, the vertical line shall be calibrated, the iron frame or wood shall be used to stabilize at the appropriate position, the sand ore shall be transported to the two ore feeding ports on the spiral roof by the slurry pump, the water shall be added, the concentration of mineral slurry shall be adjusted, the slurry shall naturally rotate from high to low, and a single coherent centrifugal force shall be generated in the rotating slope flow speed, and the difference in density, specific gravity, Granularity and morphology of the sand ore shall be obtained, Through the gravity and centrifugal force of the swirling flow, the sand and ore are separated. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings flow into the tailings hopper and are transported to the sand pit through pipelines. Then, they are discharged by a mortar pump, completing the entire beneficiation process. Spiral chute sand panning gold size range 3. Characteristics or advantages 1. Major and strong processing capacity. Today's mineral aggregate processing is objectively conditional on large-scale to create revenue. 2. Fine granulation: for the treatment of fine and micro particle minerals, especially the treatment of ore materials with Granularity of -0.047MM, the original equipment can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and machine vibration, the spiral concentrator has developed from a simple use of gravity and water resistance to a composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, more useful minerals are enriched and the separation of fine particles from these fine particles increases the ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple and simple, and it is convenient for maintenance management. The size range of spiral chute for sand panning is . 4. According to the particle size of the ore material processed, the chute can be divided into three types: (1) coarse chute. The maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can be 100-200 mm. (2) The ore chute handles 2-3 millimeter sized ores. (3) Slurry spiral chute, feeding particle size < 0.074mm. 5、 The spiral chute is suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic mineral materials. Spiral Chute Sand Gold Size Range Spiral Chute Sand Gold Size Range
Spiral Chute Gold Size Range