Quartz sand spiral chute concentrator

Quartz sand spiral chute concentrator

Quartz sand spiral chute concentrator 1. Overview: The chute sorting belongs to the slope flow sorting step. Mineral mortar is fed to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral material on the lower part is stagnant inside the groove or flows out at a low speed from the lower end. After being connected, the selected ore or tailings are obtained. The spiral concentrator is a mechanical device for mining and beneficiation, making it ideal for sand mining in coastal, river, sand beach, and stream beds. The product has the characteristics of appropriate structure, easy installation, small land occupation, easy operation, stable beneficiation, clear mineral separation, high yield, high-efficiency beneficiation, ultra-high enrichment ratio, high recycling rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion resistance, and strong applicability to fluctuations in feed volume and density, Granularity, and grade. 2、 Use a method to make the fiberglass chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in a suitable direction, and use a sand pump to send the ore sand to the top two inlet ports of the spiral. The ore sand slurry enters to increase water and adjust its density. The mineral slurry naturally swirls from top to bottom, and an inertial centrifugal force occurs in the rotating inclined flow rate, resulting in differences in gravity, particle size, and shape of the sand ore, By separating the ore from the sand through the influence of the gravity and centrifugal force of the swirling flow, the concentrate enters the beneficiation hopper and is piped out. The tailings enter the tailings hopper and are piped to the sand tank, which is then discharged by a mortar pump, completing the entire beneficiation process. Quartz Sand Spiral Chute Concentrator III. Advantages: 1. Stable, easy to operate, and with a large density range. 2. High material processing yield, high enrichment ratio, and high recycling rate. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Simple installation, simple operation, low investment, and fast returns. Quartz sand spiral chute concentrator IV. The chute can be divided into three types according to the Granularity of the processed ore materials: (1) Coarse size chute. The maximum Granularity of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral materials. (3) Slurry chute, with a feeding particle size of less than 0.074mm. 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, tantalum niobium ore and other nonferrous metal ores, rare ore gold and non nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. Quartz sand spiral chute concentrator Quartz sand spiral chute concentrator

Quartz sand spiral chute concentrator