Spiral chute direct pin

Spiral chute direct sales 1. Introduction: Chute sorting belongs to the inclined surface flow sorting process. Mineral mortar is fed to some inclined grooves or slopes, and under the push of water, the mineral particle group is loose and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After obtaining the difference, the selected ore and tailings can be obtained. Spiral chutes are machines for mining and beneficiation, making them ideal for sand mining in coastal areas, riverbanks, sandbanks, and river beds. The product has the characteristics of correct structure, simple installation, small land occupation, easy operation, stable beneficiation, clear screening of ore, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion resistance, and strong applicability to fluctuations in feed volume or density, Granularity, and grade. 2、 The uniform mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head of the spiral groove for selection. The tail of the spiral groove is equipped with a valve type product acquisition groove, which divides the sorting equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each equipment, the product gathering hopper enables the selected multi head ore flow to be densely led out. The transverse section of the fiberglass chute has a change in the slope of the curve, which is particularly suitable for the selection of fine-grained materials. spiral chute direct sales 3. Characteristics or highlights 1. Large scale, large production, and in principle, the current demand for mineral material processing is to create revenue based on scale effect. 2. Fine granulation, the treatment of fine and micro particle minerals is extremely the treatment of ore materials with particle size of -0.047mm. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., the GRP spiral chute has progressed from simply using gravity and water blocking force to the level of composite use of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of useful minerals and the separation of fine and fine particles can be enhanced, thereby increasing the recovery rate of mineral materials. 4. With energy saving and environmental protection as the basic starting point, the land area and space occupied should be small, and the water and electricity consumption should be small. 5. The operation is simple and flexible, the selection process is stable, the structure is simple, and it is convenient for maintenance management. Spiral chutes for direct sales of 4. According to the particle size of the ore being processed, chutes can be divided into three categories: (1) Coarse grained chutes, with a maximum particle size of 2-3 millimeters or more for ore feeding and up to 100-200mm. (2) Sand chute, processing 2-3MM Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074mm. 5、 The application range of fiberglass spiral chute is suitable for processing 0.6-0.03MM and this vein ore and mineral, but it is unfavorable for separation when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin ore sand, niobium tantalum ore, coastal and riverside placer mines, and sand gold mines. Spiral chute direct sales Spiral chute direct sales