Hematite separation by spiral chute

Hematite separation by spiral chute

Spiral chute for Hematite separation I. Overview of gravity beneficiation spiral chute is a generalization of the characteristics of glass fiber reinforced plastic spiral chute, glass fiber reinforced plastic spiral chute, shaking table, centrifugal concentrator. It has been appraised by the Ministry of Metallurgical Industry for relevant scientific research, design, universities, mines and other departments. It is recognized that this kind of equipment has superior performance and advanced separation indicators, and has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. Now it has been in the non-ferrous Ferrous is very suitable for a large number of applications. This equipment is suitable for separating fine and small materials with Granularity of 0.3-0.02mm to obtain iron, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus and ethylene, tungsten ore sand, cassiterite, tantalum, niobium ore and other non-ferrous metals, rare mineral metals and this non-ferrous metal ore body with different specific gravity. 2、 The working principle of the spiral mineral separator is that the mineral separator is freely placed on the cross (or tripod) of the support table. The same mortar is slowly fed onto the spiral groove surface through a feeding chute installed on the rotating groove head for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the sorted products to be divided into three (or four) categories according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi-directional mineral flow. The transverse surface of the fiberglass chute and the slope change of the curve are very suitable for selecting fine-grained materials. spiral chute separation of Hematite. 3. Characteristics and highlights. 1. Heavy duty, strong processing capacity. The objective condition of contemporary processing minerals is to create benefits through economies of scale. 2. Fine granulation is used for the treatment of fine particle grade mineral materials, especially for minerals with a particle size of -0.047 millimeters. The original equipment can generally guarantee the recovery of particles with a particle size of+0.047 millimeters. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., the spiral concentrator has developed from simple application of gravity and flow resistance to the level of composite utilization of centrifugal force, machine vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials or the separation of fine and micro particles can be increased, thereby improving the mineral recovery rate. 4. The basic starting point is to save energy, reduce consumption and environmental protection. The land area and space occupied should be small, and the water consumption and power consumption should be small. 5. Easy and flexible operation, stable sorting steps, simple structure, and convenient maintenance and management. The spiral chute selects Hematite . IV. The structure of the FRP chute is composed of six parts: feed leveler, feed chute, rotary chute, product intercepting chute, equipment gathering hopper or slot support (including cross or tripod). The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 The application range of fiberglass chute is 0.6-0.03mm for processing vein ore and ore sand, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the treatment of iron, tungsten, sand tin, tantalum niobium, coastal and riverbed mineral sand and sand gold. Selection of Hematite by spiral chute Selection of Hematite by spiral chute

Hematite separation by spiral chute