Maximum beneficiation capacity of spiral chute

Maximum beneficiation capacity of spiral chute

The maximum beneficiation capacity of spiral chutes: 1. Introduction: Gravity separation is widely used in the beneficiation of metal or non-ferrous metals due to its low environmental pollution and cost. The spiral beneficiation machine is one of the gravity beneficiation equipment, characterized by a cubic parabola shaped cross-section, suitable for processing finer particle sizes of -0.2 millimeters. In the beneficiation process, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the tail end of the tank. 2、 By using the method, the fiberglass chute is erected, aligned with the vertical line, and secured in a suitable position with an iron frame or wood. The mineral sand is transported by a sand pump to the two feeding ports on the spiral, and supplementary water is added to adjust the concentration of the mineral sand slurry. The mineral sand naturally swirls from high to low, and an inertial centrifugal force appears in the swirling slope flow rate, resulting in differences in density, specific gravity, particle size, and morphology of the mineral sand, The gravity and centrifugal force generated by the swirling flow separate the ore, and the concentrate enters the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and transported to the sand pit through a pipeline, and then discharged by a mortar pump, completing the entire beneficiation process. Maximum beneficiation capacity of spiral chute III. The special spiral concentrator has attracted more attention among various gravity separation equipment due to its low power consumption, simple structure, less land occupation, simple operation, stable beneficiation, clear ore screening, no need for moving parts, convenient Computerized maintenance management system, large processing capacity per unit size and other characteristics. Machinery with wider or flatter groove surfaces and larger areas of laminar flow of ore slurry are more suitable for processing medium to fine (-4mm) ore particles. Fiberglass spiral chutes with diameters of 400, 600, 900, and 1200MM have been produced domestically, Ф The processing output of 1200mm four heads is about 4-6 tons/hour. The maximum beneficiation capacity of spiral chute is . 4. The chute can be divided into three categories according to the Granularity of the processed mineral materials: (1) coarse particle spiral chute. The maximum particle size of ore feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) The sand ore chute is used to handle 2-3MM sized ores. (3) Slurry chute, feeding Granularity is less than 0.074mm. 5、 Use This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus ethylene, tungsten ore, tin ore, tantalum, tantalum niobium ore and other nonferrous metals, rare mineral metals or nonferrous metal mineral bodies with different specific gravity from small Granularity of 0.3-0.02MM. Maximum beneficiation capacity of spiral chute Maximum beneficiation capacity of spiral chute

Maximum beneficiation capacity of spiral chute