Spiral chute of product warehouse

Spiral chute of product warehouse

Product Warehouse Spiral Chute 1. Overview Chute sorting includes the steps of inclined flow sorting. Mortar is provided in some inclined grooves or inclined surfaces. With the assistance of flowing water, the mineral particle group is not tightened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral on the lower layer is trapped in the groove or flows out at a low speed from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and beneficiation, especially ideal for mineral mining and beneficiation at seaside, riverbank, sand bank, and creek banks. The product also features appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture-proof, rust proof, durable and anti-corrosion, and strong applicability to the fluctuation of feed volume or density, Granularity, and grade. 2、 Production principle: The screening device of the spiral concentrator is not limited to being placed on the cross (or tripod) of the support table. The average ore slurry is slowly fed to the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for sorting. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) categories radially according to grade. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that gathers and exports the obtained variable mineral flows. The transverse plane of the spiral chute and the slope of the curve vary greatly, making it suitable for the separation of small particle mineral materials. Product Warehouse Spiral Chute 3. The characteristic spiral concentrator has attracted more attention in the field of multi force beneficiation equipment due to its low power consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear beneficiation, no moving parts, easy maintenance and management, strong single area processing ability, and other characteristics. The machine has a relatively wide and stable trough surface, and the slurry has a large laminar flow area, which is more suitable for processing medium and fine (-4MM) Granularity ores. Spiral chutes with diameters of 400, 600, 900, and 1200 millimeters have been produced in China, Ф The production capacity of 1200mm four head is about 4-6 t/h. The spiral chute of the product warehouse is composed of six parts: a feeding homogenizer, a feeding chute, a rotating groove, a product cutting groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the rotating groove has one layer of pre designed durable wear-resistant layer. It has the advantages of lightweight, sturdy, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to screen minerals evenly, which is not cumbersome to operate. The mineral sorting equipment is freely stacked on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new equipment to obtain the groove, allowing the sorted new products to be divided into three (or four) new products according to grade along the radial direction. Change the selection width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi head ore flow. The cross-section of the fiberglass chute and the change in slope of the curve are particularly applicable for the selection of fine-grained materials. 5、 Usage This equipment is used to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare mineral metals and non-metallic minerals with density and specific gravity difference. Product Warehouse Spiral Chute Product Warehouse Spiral Chute

Spiral chute of product warehouse