How to draw a spiral chute

How to draw a spiral chute? Describe how the beneficiation chute belongs to the inclined flow sorting step. Mineral mortar is provided to a partially inclined chute or inclined surface. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer is so light that the mineral quickly flows out of the groove, while the lower part of the heavy mineral material stagnates inside the groove or flows out at a low speed from the lower end. After obtaining it, concentrate and tailings are obtained. Spiral concentrator is a mining and beneficiation machine, especially ideal for sand mining on beaches, river beds, beaches, and streams. The equipment is reasonably structured, easy to install, occupies a small area, has simple operation, stable beneficiation, clear mineral separation, large production capacity, high efficiency, high enrichment ratio, high recovery rate, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The mortar with the same working principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the selection width of each product, the equipment gathering hopper will collect and export the obtained multi head ore flow. The transverse plane of the spiral chute and the different slopes of the curves are particularly suitable for the separation of small particles of mineral materials. How to Draw a Spiral Chute at ? 3. Features and Highlights: 1. Heavy duty, high processing output, and the principle of contemporary mineral processing requires creating benefits through economies of scale. 2. Fine granulation is used for the treatment of fine particle minerals, especially for the treatment of mineral materials with a particle size of -0.047mm. Originally, the machine could basically ensure the recovery of particles with a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., GRP chutes have developed from the simple use of gravity and water blocking force to the composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals is enhanced and the separation of fine and micro particles is achieved, thereby increasing the recovery rate of mineral materials. 4. Based on energy saving, environmental protection and consumption reduction, the land area, space, water and electricity consumption should be small. 5. Simple and flexible operation, stable selection steps, simple structure, and convenient maintenance management. How to draw a spiral chute? @ @ 000 4. The structure of the fiberglass chute is composed of a feeding equalizer, a cross (tripod), a feeding trough, a rotating trough, a cutting trough, a gathering hopper, and a trough support. 5、 Scope of application Spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore or other metal and non-metallic ore with sufficient gravity difference. How to Draw a Spiral Chute How to Draw a Spiral Chute