2000 spiral chute gold tailings selection video

2000 spiral chute gold tailings selection video

Video 1 of the 2000 type spiral chute gold tailings selection shows that gravity separation is widely used in the beneficiation of metal or non-ferrous metal ores due to its low environmental pollution and low cost. Spiral chute is one of the gravity beneficiation machinery, with a structural characteristic of a cubic parabolic shape on the cross-section, suitable for handling finer particle sizes of -0.2mm. During the beneficiation process, do not add water for flushing, and divide the end of the chute into sections to obtain fine, medium, and tailings. 2、 The production principle is that the evenly proportioned mortar is slowly fed onto the rotating groove surface by the feeding groove at the beginning of the spiral groove, and is selected. The tail end of the spiral groove is equipped with a valve block type equipment to cut the groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each equipment, the product gathering hopper will merge and export the obtained multi head ore flow differently. The transverse plane and curve slope of the fiberglass spiral chute are different, especially suitable for the selection of small particle materials. Video 3: Advantages and Features of the 2000 Spiral Chute Gold Tailings Selection: 1. Stable, easy to operate, and with a large density range. 2. The production and processing of materials have a large production capacity, high enrichment ratio, and high recovery rate. 3. Small space occupation, low water consumption, simple structure, and no need for power. 4. Installation is simple and easy to operate, with low investment and fast returns. 2000 type spiral chute gold tailings selection video 4. Structural composition: The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering bucket, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The spiral groove has a pre made durable wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotating groove is equipped with a multi tube feeding homogenizer to evenly distribute the ore, and the operation is not complicated. The screening machine is freely stacked on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three types (or four categories) of new products along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export separately. The cross-section of the spiral chute and the slope of the curve change greatly in the separation of fine particle materials. 5、 Application field: FRP chute is suitable for separating fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and other metal and non-ferrous metal minerals with completely enough density ratio difference. 2000 type spiral chute gold tailings video @ @ 0002000 type spiral chute gold tailings video

2000 spiral chute gold tailings selection video