Is a spiral chute better or a rocking bed better

Is a spiral chute better or a rocking bed better

Is a spiral chute better or a shaker? Introduction: Gravity beneficiation is widely used in the beneficiation of metal and non-ferrous metals due to its small environmental pollution and low cost. The fiberglass spiral chute is a type of gravity separation machinery, characterized by a cubic parabolic shape on the cross-section, suitable for handling finer particle levels of -0.2MM. In the selection process, there is no need to add flushing water, and fine, medium, and tailings are segmented at the tail end of the chute. 2、 The technical principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove, implementing sorting. The tail of the rotating groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be distinguished and gathered. The cross-section of the fiberglass chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. Spiral chute is better than shaking table. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to get iron, ferrotitanium, chromite ore, pyrite, zircon, Rutile ore, monazite, phosphate ore, tungsten ore sand, sand tin ore, tantalum niobium ore, niobium ore and other non-ferrous metal, rare metal or non-ferrous metal ore bodies with different specific gravity. This machine has advantages such as stable sorting steps, easy control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery rate, small floor area, small water consumption, simple structure, no need for power, large processing output, easy installation and understanding, easy operation, and quick effectiveness when input is small. Spiral chutes are better or rocking beds are better. 4. According to the particle size of the processed ore, chutes can be divided into three categories: (1) Coarse grained chutes, with a maximum particle size of 2-3 millimeters or more for ore feeding, and a maximum of 100-200mm. (2) Sand chute, processing 2-3MM Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074mm. 5、 Applicable fields The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Is the spiral chute good or the rocking bed good? Is the spiral chute good or the rocking bed good

Is a spiral chute better or a rocking bed better