Application types of spiral chutes

Application types of spiral chutes

Spiral chute application type 1: Introduction: Gravity beneficiation is widely used in metal and non-metallic ore beneficiation due to its small environmental pollution and low cost. The fiberglass chute is one of the gravity separation equipment, with a structural feature of a cubic parabolic cross-section, suitable for handling finer particle sizes of -0.2mm. During the sorting step, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the bottom of the chute. 2、 The production principle is that the slurry is evenly distributed and slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types radially according to grade. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering bucket allows the selected variable ore flow to be separately gathered and exported. The transverse plane of the fiberglass spiral chute has different slopes, which is particularly suitable for the selection of small particle mineral materials. Spiral chute application type 3. Features This equipment is used to separate iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosgenite, tungsten, tin placer, tantalum ore, niobium ore with a particle size of 0.3-0.02mm and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with gravity differences. This machine also has advantages such as stable sorting process, easy operation, wide range of feeding density, high enrichment ratio, high recovery rate, small area occupation, small water consumption, simple structure, no need for power, large processing capacity, easy installation, simple operation, low investment, and quick effectiveness. The application type of spiral chute is . The structure of the fiberglass spiral chute is composed of a feeding device, a cross (tripod), a feeding chute, a spiral groove, a receiving groove, a gathering bucket, and a groove pillar. 5、 Scope of application: FRP spiral chute is suitable for separating fine particles of iron, ferrotitanium, ferrochromium, ferrosulfide, tin, tantalum and niobium, gold, coal, monazite, Rutile, zircon, rare earth and other metal and non-metallic mineral materials with complete Density contrast. Spiral Chute Application Type Spiral Chute Application Type

Application types of spiral chutes