Spiral chute beneficiation fineness

Spiral chute beneficiation fineness

Spiral chute beneficiation fineness 1. Equipment description: A gravity beneficiation machine that uses continuous centrifugal force generated by mortar in rotary spiral motion to achieve lightweight and heavy mineral separation. 2、 The working principle of the spiral mineral separator is that the mineral separator is freely placed on the cross (or tripod) of the support table. The same slurry is slowly fed onto the spiral groove surface of the feeding groove installed on the rotating groove head for sorting. The tail end is equipped with a valve block type product cutting groove, allowing the sorting equipment to be divided into three (or four) types according to grade along the radial direction. Change the acquisition width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that distinguishes and aggregates the selected multi-directional mineral flow. The transverse surface of the fiberglass chute has a slope change that is extremely suitable for the selection of fine-grained materials. Spiral Chute Beneficiation Fineness III. Advantages and Features 1. Ultra high efficiency, high recycling rate, and precise mineral separation; 2. Do not use power; 3. Lightweight, rust resistant, wear-resistant, and not easily corroded; 4. Low operating costs and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Spiral chute beneficiation fineness 4. Structure composition: The fiberglass chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The rotating groove has a durable wear-resistant layer made in advance on each side. It has the advantages of light weight, firmness, and durability, which are not easy to damage consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing and averaging, which is easy to control. The sorting machine does not need to be placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed to the spiral groove surface through the feeding groove on the rotating groove head for sorting. The tail end of the rotating groove is equipped with a valve block type new equipment selection groove, which will classify the selected new products into three (or four) new products according to grade along the radial direction. To adjust the orientation of the valve block and change the width of each new equipment, it is necessary to cut it off. The new product gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The horizontal plane of the spiral concentrator and the slope change of the curve are extremely suitable for the separation of small particle ore materials. 5、 Applicable field: The fiberglass chute is suitable for processing 0.6-0.03mm and vein ore as well as sand ore, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the processing of iron ore, tungsten, tin, tantalum niobium ore, coastal and riverside ore sands, gold mines, and so on. Spiral chute beneficiation fineness Spiral chute beneficiation fineness

Spiral chute beneficiation fineness