Video on the Principle of Spiral Chute Selection

Video on the Principle of Spiral Chute Selection

Video 1 on the Principle of Spiral Chute Separation: Equipment Description: A gravity separation machine used for mineral mortar to achieve lightweight and heavy mineral separation due to the inertial centrifugal force during spiral motion. 2、 The mineral mortar with equal working principles is slowly fed onto the surface of the rotating groove by installing the feeding chute at the end of the spiral groove head, and then selected. The tail of the spiral groove is equipped with a valve block type equipment to select the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows the obtained multi head ore flow to be collected and exported separately. The cross section and slope of the curve of the fiberglass chute are very suitable for the sorting of fine particle materials. Spiral chute sorting principle video 3. Features This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, sand tin, tantalum niobium, tantalum niobium and other nonferrous metal ores, rare metals and nonferrous metal ore bodies with different density and specific gravity of small materials with a Granularity of 0.3-0.02mm. This machine has advantages such as stable sorting process, easy control, wide range of ore concentration tolerance, high enrichment, high recovery probability, small land occupation, low water consumption, simple structure, no need for power, large production capacity, simple installation, simple operation, small investment, and quick effectiveness. Video of spiral chute sorting principle IV. According to the Granularity of processed mineral aggregate, the chute can be divided into three types: (1) coarse spiral chute, the maximum particle size of feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) Sand ore chute, processing 2-3 millimeter sized ore. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Usage This equipment is used to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare mineral metals and non-metallic minerals with density and specific gravity difference. Video of Spiral Chute Separation Principle Video of Spiral Chute Separation Principle

Video on the Principle of Spiral Chute Selection