Transfer Point Spiral Chute Price

Transfer Point Spiral Chute Price

Transfer point spiral chute price 1. Introduction: The fiberglass spiral chute integrates the characteristics of spiral chutes, spiral chutes, shakers, and centrifugal concentrators. It has been evaluated and approved by relevant scientific research, design, universities, and mining units organized by the Ministry of Metallurgy. It is believed that this type of machine has superior performance, improved sorting indicators, and won the Science and Technology Research Achievement Award from the Ministry of Metallurgy Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum niobium, niobium ore and other nonferrous metal ores, rare mineral metals or nonferrous metal mineral bodies with density and specific gravity difference from small materials with a Granularity of 0.3-0.02 mm. 2、 Using a method to set up a spiral concentrator, align it with the vertical line, use an iron frame or wood to fix it in a suitable position, and use a sand pump to transport the ore to the two feeding ports on the spiral head. Add supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the flow rate of the inclined plane of the rotation, an inertial centrifugal force will occur, which will cause differences in the gravity, particle size, and shape of the sand ore, Through the influence of the gravity or centrifugal force of the swirling flow, the sand ore is separated, and the selected ore flows into the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand ore pool, and then discharged by a slurry pump, completing the entire beneficiation process. Transfer point spiral chute Price 3. The characteristics of FRP chute are more concerned among many gravity separation machines because of its low energy consumption, simple structure, small land occupation, simple operation, stable beneficiation, clear mineral separation, no moving accessories, convenient Computerized maintenance management system, large processing output per unit size and other characteristics. The machine has a wide and relatively flat groove surface, and the mineral mortar flows in a laminar flow with a large area, making it more suitable for processing medium to fine (-4mm) particle size ores. We in China have made fiberglass spiral chutes with diameters of 400, 600, 900, and 1200 millimeters, Ф The processing capacity of 1200MM four head is about 4-6 T/H. The price of the transfer point spiral chute is . 4. The structural composition of the fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The spiral groove has a pre made durable wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotating groove is equipped with a multi tube feeding homogenizer to evenly distribute the ore, and the operation is not complicated. The screening machine is freely stacked on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three types (or four categories) of new products along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export separately. The cross-section of the spiral chute and the slope of the curve change greatly in the separation of fine particle materials. 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosgenite, tungsten, sand tin, tantalite, tantalum niobium or other nonferrous metals, rare ore metals or nonferrous metal mineral bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02MM. Transfer Point Spiral Chute Price Transfer Point Spiral Chute Price

Transfer Point Spiral Chute Price