Spiral chute concentrator

Spiral chute concentrator 1. Overview of chute sorting, including inclined flow sorting process. The slurry is fed to a inclined groove or inclined surface with a certain inclination. With the assistance of flowing water, the ore particles are loose and layered. The upper layer of light mineral materials are quickly discharged to the outside of the groove, while the lower layer of minerals with a larger proportion are stagnant inside the groove or slowly discharged from the lower part. After the difference is connected, the selected ore and tailings can be obtained. Spiral chutes are mining and beneficiation machinery, making them ideal for sand mining and beneficiation in coastal areas, rivers, beaches, and streams. The product also has the characteristics of suitable structure, simple installation, small footprint, easy operation, stable beneficiation, clear beneficiation, strong processing capacity, high efficiency beneficiation concentration ratio, high recovery rate, and stable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume or density, Granularity, and grade. 2、 Production principle: The spiral chute mineral separator does not need to be restricted from being stacked on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head for selection. The tail is equipped with a valve type equipment selection tank, which divides the sorted products into three types (or four categories) according to grade along the radial direction. Change the cutting width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that allows for the dense export of the obtained variable mineral flow differentiation. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine mineral particles. Spiral Chute Concentrator III. Advantages and Features 1. Stable, easy to control, and with a large density range. 2. The material production and processing yield is large, the enrichment ratio is high, and the recovery rate is high. 3. Small area occupation, low water consumption, simple structure, and no need for power. 4. It is simple and easy to operate, with minimal investment and fast returns. Spiral chute concentrator 4. Structural composition: The fiberglass chute is composed of a feeding homogenizer, a cross (tripod), a feeding trough, a rotating trough, a selection trough, a gathering hopper, and a trough support. 5、 The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, sand tin ore, tantalum niobium ore, sand gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and nonferrous metal minerals with sufficient density and specific gravity difference. Spiral chute concentrator Spiral chute concentrator