Which is the best type of spiral chute

Which is the best type of spiral chute

Which is the best type of spiral chute? 1. Explanation: The spiral concentrator summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal gold concentrators. After being evaluated by relevant scientific research, design, universities, and beneficiation enterprises organized by the Ministry of Metallurgy, it is believed that this type of mechanical performance is excellent, the sorting indicators are advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating small materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, cassiterite, tantalum niobium, niobium and other non-ferrous metal ores, rare mineral gold or non-metallic mineral bodies with gravity difference. 2、 The usage method is to make the fiberglass chute stand up, align it with the vertical line, fix it in the appropriate position with an iron frame or wood, and send the sand ore to the two feeding ports on the top of the spiral through a slurry pump. The water is added and the mineral slurry concentration is adjusted. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the rotating inclined flow rate, which is distinguished by the gravity, particle size, and state of the mineral sand, By utilizing the gravity or centrifugal force of the swirling flow, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a mortar pump, completing the entire beneficiation process. Which is the best type of spiral chute for . 3、 The special spiral chute has attracted special attention in many gravity beneficiation machines due to its low power consumption, simple structure, small floor area, simple operation, stable beneficiation, clear beneficiation, no moving parts, convenient Computerized maintenance management system, large processing capacity per area and other characteristics. The machine has a relatively wide and stable groove surface, and the mineral mortar has a large area of laminar flow, which is more suitable for processing medium and fine (-4mm) Granularity ores. Fiberglass spiral chutes with diameters of 400, 600, 900, and 1200MM have been manufactured domestically, Ф The production of 1200 millimeters of four heads is approximately 4-6 tons per hour. Which is the best type of spiral chute. Which is the best type of spiral chute? The spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product intercepting chute, an equipment gathering hopper, and a bracket for this chute (including a cross or triangular frame). The spiral groove connected by the rotating plate is a key accessory. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, sturdy, and long-lasting consumer goods that are not easily damaged. The spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is easy to operate. There is no need to restrict the stacking of mineral sievers on the cross (or tripod) of the support table. The evenly distributed mineral mortar is slowly fed to the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type new product selection groove, which allows the sorting equipment to be divided into three categories (or four types) of new products according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows. The cross section and slope of the curve of the fiberglass chute are very suitable for the selection of fine particle materials. 5、 Applicable. This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphoethylene, tungsten, tin ore, tantalum ore, tantalum niobium ore or other non-ferrous metal, rare metal and non-ferrous metal ore bodies with density and specific gravity difference from fine and small materials with Granularity of 0.3-0.02mm. Which type of spiral chute is best? Which type of spiral chute is best

Which is the best type of spiral chute