Diaphragm type jig

Diaphragm type jig equipment image：

Diaphragm type jig equipment details：

1、 Overview

Diaphragm jigs are divided into two forms: left type and right type jigging surfaces. The diaphragm jig is a fixed and immovable die. Diaphragm jigs are suitable for the separation of metallic materials such as iron ores, such as tungsten bearing placers, tin ores, etc. They can be used to select both fine sand raw materials and coarse raw materials. The larger feed size distribution is 6-8mm, but in some cases, the larger Degree distribution is 12mm.

2、 Structural composition

The entire body, transmission system, underfloor heating water separator, diaphragm, and valve are key components. The human body has two sizes of jump stop buckets, and each diaphragm bucket is divided into two parts: the jig area and the diaphragm area using different baffles. The entire process of jigging is carried out by the agitation of substances (water) caused by the repeated left and right movements of the vulcanized rubber diaphragm. The motor drives the large leather pulley to rotate according to the triangular belt, causing the crankshaft on the camshaft to move left and right for fitness. The connecting crank arm with this crankshaft also moves up for fitness. There are also two crankshafts on the crank arm that are connected to a vulcanized rubber diaphragm, thereby causing the diaphragm to repeatedly move left and right for jigging.

3、 Working principle

According to the particle size distribution of the iron ore to be solved, the diaphragm jig can change the stroke of the crankshaft and select different four strokes, so as to obtain the best practical effect of jigging. The way to change the punching frequency is to replace the small belt pulley, which can be divided into two types: 322 times per minute; 420 times/minute. There are 11 different four stroke options available, including loosening the fixed screws and screw caps, pulling out the positioning pin, and rotating the relative position between the axial force adjustment sleeve and the camshaft

4、 Application scope

Diaphragm jigs are widely used in the separation of minerals such as gold, tin, tungsten, titanium, hematite, copper, coal, etc., especially in the manganese ore beneficiation plant industry.

Diaphragm type jig Technical Parameter：

Detailed consultation with technical manager

Diaphragm type jig Related products

• 

  barite beneficiation equipment

• 

  Silica beneficiation equipment

• 

  Rare earth ore beneficiation equipment

• 

  High Tension Electrostatic separator

• 

  Arc plate electric separator

• 

  Ore electric separator