Specification parameters of re selected spiral chute

Specification parameters of re selected spiral chute

The specifications and parameters of the re selection spiral chute are as follows: 1. Introduction: The fiberglass spiral chute summarizes the characteristics of the re selection spiral chute, spiral chute, shaker, and centrifuge used for beneficiation. After being evaluated by relevant scientific research, design, school, and concentrator units organized by the Ministry of Metallurgical Industry, it is believed that this machine has excellent performance, advanced sorting goals, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This product is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, tantalum niobium ore and other non-ferrous metal ores, rare mineral metals or non-metallic mineral bodies with gravity differences. 2、 The slurry with the same technical principle is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove for selection. The tail end of the rotating groove is equipped with a valve block type equipment to select the groove, allowing the sorted products to be divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to obtain the width of each device, the product gathering hopper will differentiate and densely extract the intercepted multi-directional mineral flow. The cross-section of the spiral chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. Specification parameters of gravity concentration spiral chute 3. Characteristics and highlights 1. Heavy processing, large processing output, and the overall demand for contemporary processing of mineral aggregate is to use scale effect to build revenue. 2. Fine granulation is used for the treatment of fine and small particle grade mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., the spiral chute has developed from the simple application of gravity and flow resistance to the composite application of centrifugal force, equipment vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials and the separation of fine and micro particles are increased, thereby improving the mineral recovery rate. 4. Based on energy conservation, environmental protection and consumption reduction, the land area and space occupied should be small, and water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, and convenient maintenance management. The specification parameters of gravity concentration spiral chute IV. According to the Granularity of the processed mineral aggregate, the chute can be divided into three types: (1) coarse spiral chute, the maximum particle size of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The application scope of this machine is to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, niobium ore and other nonferrous metals, rare mineral metals and this nonferrous metal mineral body with gravity difference from fine materials with Granularity of 0.3-0.02MM. Re select spiral chute specification parameters Re select spiral chute specification parameters

Specification parameters of re selected spiral chute