Three head 600 spiral chute

Three head 600 spiral chutes 1. Description: Spiral chutes are a combination of fiberglass spiral chutes, gravity separation spiral chutes, shakers, and centrifugal concentrators. After relevant scientific research organized by the Ministry of Metallurgy, design, university, and other departments of this mine have identified and passed the evaluation. It is believed that this type of equipment has superior performance and advanced sorting goals. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It is now in the field of non-ferrous metals Many Ferrous mines use it. This machine is suitable for sorting iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus ethylene, tungsten, tin ore, tantalum, niobium ore and other non-ferrous metal, rare metal and nonferrous metal ore bodies with specific gravity difference of 0.3-0.02 mm fine materials. 2、 Production principle: The spiral chute mineral separator does not need to be restricted from being stacked on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head for selection. The tail is equipped with a valve type equipment selection tank, which divides the sorted products into three types (or four categories) according to grade along the radial direction. Change the cutting width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that allows for the dense export of the obtained variable mineral flow differentiation. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine mineral particles. Three head 600 spiral chute 3. Features and advantages 1. Large scale and strong processing capacity. Today, mineral processing objectively creates benefits through large-scale production. 2. Fine granulation: for the treatment of fine and micro particle grade minerals, especially the treatment of ore materials with a particle size of -0.047 mm, the original machine can generally ensure the recovery of+0.047 mm Granularity. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., GRP spiral chute has developed from simple use of gravity and water blocking force to composite centrifugal force, equipment vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, thereby increasing the recovery rate of ore materials. 4. With energy saving and environmental protection as the basic starting point, the area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure and convenient Computerized maintenance management system. The three head 600 spiral chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, a product cutting groove, an equipment gathering hopper or a groove bracket (including a cross or triangular frame), etc. The spiral groove connected by the spiral plate is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a predetermined wear-resistant layer. It also has the advantages of lightweight, sturdy, and durable consumer goods. Above the spiral groove, there is a multi tube feeding homogenizer for ore dressing and averaging, with simple control. The mineral screening device is freely placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed to the rotating groove surface by installing it on the feeding groove at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product acquisition groove, and the selected new products are divided into three categories (or four categories) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted variable mineral flows to be gathered and exported separately. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine ore materials. 5、 Scope of application: The spiral concentrator is suitable for processing 0.6-0.03 millimeters of vein ore and this ore sand, but it is unfavorable for separation when the mud content is high. At present, it has been widely used for processing iron ore sand, tungsten, tin ore, tantalum niobium, coastal and riverside ore sand, and placer gold. Triple 600 spiral chute Triple 600 spiral chute