Fiberglass spiral chute manufacturer direct sales

Fiberglass spiral chute manufacturer direct sales

The direct sales of fiberglass spiral chute manufacturers indicate that gravity beneficiation is widely used in the beneficiation of metal or non-ferrous metals due to its low pollution and low cost. The spiral concentrator is one of the gravity separation machines, characterized by a cubic parabola shaped cross-section, suitable for processing finer particle sizes of -0.2 millimeters. In the sorting process, no flushing water is required, and the tailings are obtained by dividing them into sections at the tail end of the tank. 2、 The production principle is that the slurry is evenly distributed and slowly fed to the spiral groove surface through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types radially according to grade. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering bucket allows the selected variable ore flow to be separately gathered and exported. The transverse plane of the fiberglass spiral chute has different slopes, which is particularly suitable for the selection of small particle mineral materials. fiberglass spiral chute manufacturer direct sales 3. Advantages and features: 1. Stable, easy to operate, and large density range. 2. The material processing yield is large, the enrichment ratio is high, and the recycling rate is high. 3. The space occupation is not large, the water consumption is low, the structure is simple and simple, and there is no need for power. 4. Easy installation, easy operation, low investment, and fast returns. The fiberglass spiral chute manufacturer directly sells 4. The structural composition of the fiberglass chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, an equipment acquisition groove, a product gathering hopper, or a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting spiral pieces is the main component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue), which is connected together through screws. The selected surface of the rotating groove has a pre designed durable anti wear layer. It also has the advantages of lightweight, sturdy, and long-lasting consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for screening ore, which is simple to operate. The mineral separator does not need to be restricted to placing on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through a feeding chute installed at the head end of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric annular tube that allows the selected variable ore flows to be densely exported. The transverse surface of the fiberglass spiral chute and the slope of the curve change, which is particularly suitable for the separation of small particle mineral materials. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten, sand tin, tantalum niobium, tantalum niobium of fine materials with a particle size of 0.3-0.02mm, and has the specific gravity difference to obtain other non-ferrous metal ores, rare metals and this non-metallic orebody. Fiberglass spiral chute manufacturer direct sales Fiberglass spiral chute manufacturer direct sales

Fiberglass spiral chute manufacturer direct sales