Square warehouse wall mounted spiral chute

Square warehouse wall mounted spiral chute

Fang Cang Wall Mounted Spiral Chute 1. Introduction: Spiral Chute combines the characteristics of spiral chutes, fiberglass spiral chutes, shakers, and centrifugal gold concentrators. After scientific research organized by the Ministry of Metallurgy, design, operation and appraisal by departments such as universities and concentrators, it has been recognized as having excellent performance, advanced sorting objectives, and won the Science and Technology Research Achievement Award from the Ministry of Metallurgy Industry. It has been widely used in non-ferrous and black mining metals. This machine can be used to separate iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosgenite, wolframite, placer tin, tantalite, tantalum niobium ore or other nonferrous metals, rare mineral metals and nonferrous metal minerals with different density and specific gravity. 2、 The spiral chute shall be set up with skills, the vertical line shall be calibrated, the iron frame or wood shall be used to fix the suitable position, the sand pump shall be used to transport the ore sand to the two ore inlets above the spiral, the increased water shall be added, and the density of the ore slurry shall be adjusted. The ore slurry shall naturally rotate from high to low, and a coherent centrifugal force shall be generated in the flow speed of the rotating inclined plane to obtain the difference in gravity, Granularity and shape of the sand ore, By utilizing the functions of gravity and centrifugal force generated by swirling flow, the ore and sand are separated. The concentrate flows into the beneficiation hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand pit through a pipeline. Then, they are discharged by a slurry pump, completing the entire beneficiation process. square silo wall mounted spiral chute III. Advantages and characteristics: 1. High efficiency, high recovery rate, and precise ore separation; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; Low cost and long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The frictional force on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The square warehouse wall mounted spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating groove, an equipment acquisition groove, a product gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the rotating blades is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and long-lasting durability in consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing, which is also easy to operate. The ore separator is freely placed on the cross (or tripod) on the support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the beginning of the rotating groove, and the selection is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the sorted new products are divided into three categories (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The transverse plane of the spiral chute and the different slopes of the curves are very suitable for the selection of small particle mineral materials. 5、 This machine is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin ore, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare ore metals and non-metallic ore bodies with gravity difference from 0.3-0.02mm fine materials. Square Warehouse Wall Mounted Spiral Chute Square Warehouse Wall Mounted Spiral Chute

Square warehouse wall mounted spiral chute