Manufacturer of mining spiral chutes

Manufacturer of mining spiral chutes

Mining spiral chute manufacturer 1. Instructions. The gravity separation spiral chute is a combination of the characteristics of the FRP spiral chute, the FRP spiral chute, the shaking table, and the centrifugal gold concentrator. After the relevant scientific research organized by the Ministry of Metallurgical Industry, and the operation appraisal of the design, school, and this mineral processing enterprise, it is recognized that this kind of equipment has excellent performance and advanced separation indicators. At the same time, it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry, and has been widely used in non-ferrous and Ferrous mines. This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphoethylene, tungsten ore sand, tin placer, tantalite, tantalum niobium ore and other nonferrous metals, rare mineral metals and nonferrous metal ore objects due to gravity difference. 2、 The application technique is to make the fiberglass spiral chute stand up, align it with the vertical line, use an iron frame or wood to stabilize it in the appropriate position, use a mortar pump to deliver the sand ore to the two feeding ports on the spiral head, enter the supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the rotating inclined plane flow rate, an inertial centrifugal force will appear, resulting in differences in gravity, particle size, and morphology of the ore sand, By obtaining gravity and centrifugal force through swirling flow, the efficiency is achieved, allowing the separation of ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. Manufacturer of spiral chutes for mining purposes. 3、 Characteristics and highlights: 1. Heavy duty, high processing yield, and the objective need for contemporary mineral processing to create benefits through economies of scale. 2. Fine granulation: the treatment of fine and small particle size minerals is very important for the treatment of ore materials with a particle size of -0.047MM. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple application of gravity and water flow blocking force to composite application of centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals and the separation of fine or fine particles are increased, thereby improving the ore recovery rate. 4. With energy conservation, environmental protection and consumption reduction as the basic starting point, the area and space should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. Mining spiral chute manufacturer IV. Structural composition. The fiberglass spiral chute produced by the manufacturer of mining spiral chutes is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product selection chute, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The rotating groove has a pre designed durable and wear-resistant layer on the selected surface. She has the advantages of lightweight, solid, and durable use of consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer above it to screen the ore, which is also easy to operate. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mineral mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new equipment cutting groove, allowing other new products to be selected and classified into three (or four) categories according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multi-directional mineral flow. The cross section of the spiral chute, with the slope change of the curve, is particularly suitable for the sorting of fine-grained materials., 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphoethylene, tungsten, tin ore, tantalum ore, tantalum niobium ore or other nonferrous metals, rare metals and nonferrous metal ore bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02mm. Manufacturer of mining spiral chute: Manufacturer of mining spiral chute

Manufacturer of mining spiral chutes