Brief Introduction to the Basic Principles of Spiral Chutes

Brief Introduction to the Basic Principles of Spiral Chutes

Briefly explain the basic principle of spiral chutes. The chute sorting of minerals includes a slope flow sorting process. The slurry is fed to a inclined chute or slope, and under the push of water flow, the ore particles are loose and layered. The upper layer is so light that the minerals are quickly discharged to the outside of the chute, while the lower part, which is heavier than the main minerals, stagnates in the inner groove or slowly discharges from the lower part. After being obtained, the concentrate and tailings can be obtained. The spiral concentrator is a machine for mining and beneficiation, especially ideal for mineral mining on coasts, riverbanks, sandbanks, and river beds. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operability, stable beneficiation, clear screening of minerals, strong processing capacity, high efficiency, ultra-high enrichment ratio, high recovery rate, and stable operation. There are also advantages such as lightweight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The technical principle is that the uniform slurry is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. Briefly describe the basic principle of spiral chutes. 3、 Features This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, sand tin, tantalum niobium, tantalum niobium and other nonferrous metal ore, rare metal and nonferrous metal ore bodies with different density and specific gravity of small materials with Granularity of 0.3-0.02mm. This machine has advantages such as stable sorting process, easy control, wide range of ore concentration tolerance, high enrichment, high recovery probability, small land occupation, low water consumption, simple structure, no need for power, large production capacity, simple installation, simple operation, small investment, and quick effectiveness. Briefly describe the basic principle of spiral chutes. According to the Granularity of the processed ore materials, the chutes can be divided into three types: (1) Coarse grained chutes. The maximum particle size of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) The ore chute handles 2-3mm sized ore. (3) Slime chute, feeding Granularity is less than 0.074MM. 5、 This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. Brief Introduction to the Basic Principles of Spiral Chutes Brief Introduction to the Basic Principles of Spiral Chutes

Brief Introduction to the Basic Principles of Spiral Chutes