Design of Spiral Chute Beneficiation

Design of Spiral Chute Beneficiation

Design of Spiral Chute Beneficiation I. Equipment Description. A gravity beneficiation machine that utilizes the continuous centrifugal force generated by mortar in rotary spiral motion to achieve lightweight and significant mineral separation. 2、 The working principle of the spiral chute for manganese selection is that the design of the spiral chute for beneficiation evenly obtains the ore slurry by slowly feeding it onto the rotating groove surface through the feeding chute installed at the beginning of the spiral groove, and implements sorting. The tail end of the spiral groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse surface of the fiberglass chute has different slopes, which is very suitable for the separation of fine mineral particles. The design of the spiral chute beneficiation is characterized by three aspects: 1. Stable sorting process and easy control; 2. Wide range of allowable changes in feed density; 3. Ultra high enrichment ratio and high recovery probability; 4. Small occupied area and low water consumption; 5. Simple structure without power; 6. Strong processing capacity; 7. Simple installation and easy operation of the spiral chute for potassium feldspar powder. 8. The design of a small effective and fast spiral chute for beneficiation is . 4. Structural composition. The design of the spiral chute for mineral processing is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, an equipment intercepting trough, a product gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The selected surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of being lightweight, sturdy, durable, and not easily damaged consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The concentrator is not limited to being placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding chute at the head of the rotating groove for sorting. The tail of the rotating groove is installed in a valve type new product selection groove, and the selected new products are divided into three types (or four types) of new equipment along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted multi-directional mineral flow to converge and lead out. The cross section of the spiral chute and the different slopes of the curves are very suitable for sorting fine particle materials. 5、 The range of application is the experimental spiral chute gravity separation. The glass fiber reinforced plastic spiral chute is suitable for the separation of fine particles of iron, ferrotitanium, ferrochrome, ferrosulfide, tin, tantalum and niobium, gold, coal, monazite, Rutile, zircon, rare earth and other metal and non-metallic mineral materials with complete Density contrast. Design of Spiral Chute Beneficiation Design of Spiral Chute Beneficiation

Design of Spiral Chute Beneficiation