Price of rotating spiral chute

Price of rotating spiral chute

The rotary spiral chute is widely used in metal and non-metallic ore beneficiation due to its low environmental pollution and low cost. Glass fiber reinforced plastic chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain refined, medium, and tailings. 2、 The working principle is the same: the mortar is slowly fed to the surface of the spiral groove by installing a feeding chute at the end of the rotating groove head, and sorting is carried out. The tail of the rotating groove is equipped with a valve type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the obtained multi-directional mineral flow to be collected and led out separately. The cross-section of the spiral chute, with a slope change of ten thousand, is suitable for the separation of fine particle materials. Price 3, Characteristics and Advantages of the Rotating Spiral Chute: 1. Heavy duty, high production capacity, and the principle of contemporary mineral processing is to create benefits through economies of scale. 2. Fine granulation, the treatment of fine and micro particle grade mineral aggregate is the treatment of minerals with a particle size of -0.047MM. The original equipment can basically ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP spiral chute has developed from simple application of gravity and water blocking force to composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of suitable mineral materials and the separation of small or fine particles can be increased, thereby improving the mineral recovery rate. 4. With energy saving and environmental protection as the fundamental starting point, the land area and space occupied should be small, and the water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting steps, simple structure, and convenient Computerized maintenance management system. The price of the rotating spiral chute is 4. The structure of the fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre designed durable wear-resistant layer. He also has the advantages of lightweight, sturdy, durable and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to screen the ore evenly, making it easy to control. The ore separator is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove by the feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is installed in a valve type new equipment to obtain the groove, allowing the sorted new products to be divided into three categories (or four categories) along the radial direction according to the grade of the new equipment. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that densely leads out the selected multi head ore flow. The horizontal plane of the spiral concentrator, with a change in the slope of the curve, is particularly suitable for the separation of fine particle materials. 5、 This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten, sand tin, tantalum niobium, tantalum niobium of fine materials with a particle size of 0.3-0.02mm, and has the specific gravity difference to obtain other non-ferrous metal ores, rare metals and this non-metallic orebody. Rotating Spiral Chute Price Rotating Spiral Chute Price

Price of rotating spiral chute