Spiral chute shaking bed gold tailings

Spiral chute shaking bed gold tailings

Spiral Chute Shaker Gold Tailings I. Overview of Chute Sorting, including the inclined flow sorting process. The slurry is fed to a inclined groove or inclined surface with a certain inclination. With the assistance of flowing water, the ore particles are loose and layered. The upper layer of light mineral materials are quickly discharged to the outside of the groove, while the lower layer of minerals with a larger proportion are stagnant inside the groove or slowly discharged from the lower part. After the difference is connected, the selected ore and tailings can be obtained. Spiral chutes are mining and beneficiation machinery, making them ideal for sand mining and beneficiation in coastal areas, rivers, beaches, and streams. The product also has the characteristics of suitable structure, simple installation, small footprint, easy operation, stable beneficiation, clear beneficiation, strong processing capacity, high efficiency beneficiation concentration ratio, high recovery rate, and stable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume or density, Granularity, and grade. 2、 The method of use is to set up the fiberglass chute, calibrate the vertical line, use an iron frame or wood to fix it in the appropriate position, and use a slurry pump to send the sand ore to the two feeding ports on the spiral head to supplement water and adjust the density of the mineral sand slurry. The mineral sand slurry naturally rotates from top to bottom, and an inertial centrifugal force occurs in the flow speed of the rotating inclined plane, which varies in density, specific gravity, particle size, and morphology of the sand ore, Under the action of swirling gravity or centrifugal force, the sand and ore are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are piped to the sand pit. Then, they are discharged by a sand pump, completing the entire beneficiation process. Spiral Chute Shaker Gold Tailings 3. Features 1. Stable and easy to control selection steps 2. Wide range of allowable ore concentration 3. High enrichment ratio and high recycling rate 4. Small occupied area and low water consumption 5. Simple structure, no power required 6. Large production capacity 7. Easy installation and operation 8. Low investment and quick effectiveness Spiral Chute Shaker Gold Tailings 4 The chutes can be divided into three types according to the Granularity of the processed ore materials: (1) coarse grained spiral chutes, with the maximum feeding particle size of 2-3 mm or more, and the maximum feeding particle size of 100-200 mm. (2) Sand ore chute, processing 2-3 mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The fiberglass spiral chute is suitable for processing 0.6-0.03MM and vein or placer ores, but it is unfavorable for sorting when the mud content is high. Now it has been widely used for processing iron ore, tungsten, tin ore, niobium tantalum ore, coastal and riverside ore sands, and gold mines. Spiral Chute Shaker Gold Tailings Spiral Chute Shaker Gold Tailings

Spiral chute shaking bed gold tailings