Spiral chute manganese selection

Spiral chute manganese selection

Spiral chute manganese separation: 1. Describe the beneficiation chute including the slope flow separation process. The mortar is fed to some inclined grooves or slopes, and with the help of flowing water, the mineral particle group is not tight and layered. The lighter mineral material on the upper part is quickly discharged to the outside of the groove, while the heavy mineral on the lower layer is retained in the groove or discharged from the bottom at low speed. After receiving the difference, the selected ore or tailings can be obtained. Fiberglass spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in bays, rivers, sandbanks, and streams. The product also has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, high yield, high efficiency beneficiation and enrichment ratio, high recovery and utilization rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume, density, Granularity, and grade. 2、 Working principle: The fiberglass chute separator does not need to be placed on a cross (or tripod) on a support table. The same mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head end of the spiral groove, and sorting is carried out. The bottom is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that converges and induces the obtained variable mineral flows. The transverse section of the fiberglass spiral chute and the change in slope of the curve are extremely suitable for the selection of fine particle materials. spiral chute manganese separation III. Features 1. Stable separation steps and simple control. 2. Large allowable variation range of ore feed concentration. 3. High enrichment and high recovery rate. 4. Small floor area and small water consumption. 5. Simple structure, no power required. 6. Large output. 7. Simple installation and operation. 8. Small investment and quick effect. Spiral chute manganese separation, Chutes can be divided into three types: (1) Coarse spiral chutes, with a maximum particle size of 2-3mm or more for feeding, and a maximum size of 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Purpose This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphorus ethyl, tungsten sand, tin ore, tantalum, niobium ore and other non-ferrous metals, rare mineral metals and non-ferrous metal minerals with gravity difference from fine materials with Granularity of 0.3-0.02mm. Spiral chute manganese selection Spiral chute manganese selection

Spiral chute manganese selection