Acceptance criteria for spiral chutes

Acceptance criteria for spiral chutes

Acceptance Standard for Spiral Chutes 1. Product Introduction: A gravity separation machine used for separating light and heavy minerals in mineral mortar under inertial centrifugal force during spiral motion. 2、 The mineral mortar with equal production principles is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove for sorting. The bottom of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three categories according to grade along the radial direction. Change the selection width of each product by adjusting the position of the valve block, and the equipment gathering bucket will gather and export the obtained variable mineral flow separately. The transverse plane of the fiberglass spiral chute and the change in slope of the curve are particularly applicable for the sorting of fine particle materials. Acceptance criteria for spiral chutes: 3. Characteristics: 1. Stable sorting process and easy control. 2. Wide range of ore concentration allowed. 3. High enrichment ratio and recovery probability. 4. Small land occupation and low water consumption. 5. Simple structure without power. 6. Strong processing capacity. 7. Easy installation and operation. 8. Small investment and quick effect. Acceptance criteria for spiral chutes: . 4. Structure: Fiberglass reinforced plastic spiral chutes are composed of ore feeding homogenizers The feeding chute, spiral groove, product acquisition groove, equipment gathering hopper, and groove bracket (including cross or triangular frame) are composed of six parts. The rotating groove formed by connecting rotating discs is the main component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is connected together through screws. The sorting surface of the spiral groove has a pre designed durable wear-resistant layer. She has the advantages of being lightweight, sturdy, and durable in using consumables. There is a multi tube feeding homogenizer above the rotating groove to screen minerals evenly, which is not cumbersome to operate. The screening machine does not need to be restricted from being placed on the cross (or tripod) on the support table. The uniform slurry is slowly fed to the surface of the spiral groove through the feeding groove on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve type new equipment selection groove, allowing the sorted new products to be divided into three (or four) types of new products according to grade along the radial direction. Change the width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that separates and merges the intercepted multi-directional mineral flows. The cross section of the spiral chute and the slope change of the curve are very applicable to the selection of fine materials. 5、 Scope of application The spiral chute can be used to separate fine grained iron, ferrotitanium, ferrochrome, ferrosulfide, tin ore, tantalum niobium, gold ore, coal, monazite, Rutile, zircon, rare earth and other metals and nonferrous metals with a completely different specific gravity. Acceptance Standard for Spiral Chutes Acceptance Standard for Spiral Chutes

Acceptance criteria for spiral chutes