Picture of a 38 degree spiral chute

Picture of a 38 degree spiral chute

Picture 1 of a 38-degree spiral chute. Product introduction: A gravity separation machine used for separating light and heavy minerals in mineral mortar due to the inertial centrifugal force generated during spiral motion. 2、 The glass fiber reinforced plastic spiral chute shall be set up with skills, aligned with the vertical line, and fixed in a suitable position with iron shelves or wood. The sand pump shall be used to transport the mineral sand to the two ore feeding ports above the spiral, add make-up water, and adjust the concentration of the mineral slurry. The mineral slurry naturally swirls from high to low. A single coherent centrifugal force appears in the rotating slope flow rate, and the difference in the gravity, Granularity and shape of the mineral sand is obtained, By utilizing the gravity and centrifugal force of the swirling flow, the sand and ore are separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire process of beneficiation. 38 degree spiral chute Picture 3. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to get iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metals, rare mineral metals and non-ferrous metal minerals with different specific gravity. This equipment has the advantages of stable sorting steps, simple control, wide range of ore concentration tolerance, high enrichment, high recovery rate, small land occupation, low water consumption, simple structure, no power required, large output, easy installation, simple operation, small investment, and quick effectiveness. The structure of the spiral concentrator consists of a feeding average device, a cross (tripod), a feeding trough, a spiral trough, a selection trough, a gathering hopper, and a trough support. 5、 This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethylene, tungsten, tin ore, tantalum ore, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and proportion. 38 degree spiral chute image 38 degree spiral chute image

Picture of a 38 degree spiral chute