Tin ore spiral chute

Tin ore spiral chute. 1、 Equipment Description: A gravity separation machine used for mineral mortar to achieve lightweight and heavy mineral sorting due to the inertial centrifugal force during spiral motion. Jiangxi Spiral Chute Price, II. Production Principle: The spiral concentrator is freely placed on a cross (or tripod) on a support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The tail end is equipped with a valve block type equipment cutting groove, which divides the sorted products into three (or four) categories according to grade along the radial direction. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected variable ore flows to converge and export differently. The cross section and slope of the curve of the fiberglass chute are very suitable for the separation of small particle materials. Tin Mine Spiral Chute. 3、 Features This equipment can be used to separate iron, ferrotitanium, ferrochrome, pyrite, zircon ore, Rutile ore, monazite ore, phosphate rock, tungsten, tin ore, tantalum ore, niobium and other non-ferrous metal ores, rare mineral metals and non-metallic minerals due to gravity difference. This machine has the advantages of stable and easy control in the selection process, allowing for a wide range of ore concentration, high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, large processing output, simplified installation, simple operation, low investment, and fast efficiency. Tin ore spiral chute . 4、 The structural composition of the fiberglass chute consists of six parts: a feeding distributor, a feeding trough, a spiral trough, a product selection trough, an equipment gathering hopper, and a trough bracket (including a cross or triangular frame). The rotating groove connected by spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together, with a pre made durable and wear-resistant layer on the selected surface of the spiral groove. It has the advantages of lightweight, sturdy, and long-lasting consumables. The head of the rotating groove is equipped with a multi tube ore feeder to evenly separate minerals, making it easy to control. The sorting machine is not limited to stacking on the cross (or tripod) of the support table. Uniform mineral mortar is slowly fed onto the rotating groove surface through the feeding chute at the end of the spiral groove head, and sorting is carried out. The bottom of the spiral groove is installed in a valve block type new product cutting groove, allowing other new equipment to be selected and classified into three types (or four types) of new equipment along the radial direction according to grade. Change the acquisition width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that gathers and leads out the selected multi head ore flow. The lateral plane of the spiral concentrator, with a change in the slope of the curve, is extremely suitable for the separation of fine particle materials. 5、 Scope of use. The spiral chute is suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite, sand tin, tantalum niobium ore, placer gold ore, coal, monazite, Rutile, zircon ore, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. Tin ore spiral chute Tin ore spiral chute