What is the use of spiral chutes

What is the use of spiral chutes

What is the use of spiral chutes. 1、 The gravity concentration spiral chute is a combination of the characteristics of gravity concentration spiral chute, spiral concentrator, shaking table and centrifugal gold concentrator. It has been appraised by the Ministry of Metallurgical Industry for relevant scientific research, design, universities, mineral processing enterprises and other units. It believes that the mechanical performance is superior and the separation index is advanced, and it has won the Scientific and Technological Research Achievement Award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare metals and non colored metal minerals with different specific gravity from fine materials with Granularity of 0.3-0.02 mm. 2、 The mortar with the same working principle is slowly fed to the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the selection width of each product, the equipment gathering hopper will collect and export the obtained multi head ore flow. The transverse plane of the spiral chute and the different slopes of the curves are particularly suitable for the separation of small particles of mineral materials. What are the three advantages and characteristics of the spiral chute? 1. High efficiency, high recovery rate, and correct screening of minerals. 2. Do not use power; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation efficiency better than that of other plastic surfaces. What's the use of spiral chutes. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. Spiral chutes are used for potassium feldspar powder. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Scope of application. Fiberglass spiral chute is suitable for separating fine grained iron, ferrotitanium, ferrochrome, ferrosulfide, tin ore, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metal and nonferrous metal minerals with sufficient density ratio difference. What is the use of spiral chutes What is the use of spiral chutes

What is the use of spiral chutes