Which is the best spiral chute for mineral processing

Which is the best spiral chute for mineral processing

Which is the best spiral chute for mineral processing. 1、 The spiral concentrator summarizes the characteristics of spiral concentrators, spiral concentrators, shakers, and centrifugal gold concentrators. After evaluation by relevant scientific research, design, universities, and beneficiation enterprises organized by the Ministry of Metallurgy, it is believed that this type of mechanical performance is excellent, the separation indicators are advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This machine is suitable for separating small materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, cassiterite, tantalum niobium, niobium and other non-ferrous metal ore, rare mineral gold or non-metallic mineral body with gravity difference. 2、 Production Principle Spiral Chute Transformation Effect. The average mineral mortar is slowly fed to the surface of the spiral groove through the feeding chute at the head end of the rotating groove, and then selected for operation. The bottom of the rotating groove is equipped with a valve block type equipment selection groove, which divides the sorted products into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows for the differentiation, convergence, and export of the obtained variable mineral flow. The cross-section and slope of the spiral chute are extremely suitable for the separation of fine ore materials. Which company is better for the mineral processing spiral chute? 3. Features: 1. Stable and easy to operate sorting process. 2. Wide range of allowable changes in feed density. 3. High concentration and high recovery rate. 4. Small floor area and low water consumption. 5. Simple and simple structure with no need for power. 6. Large production capacity. 7. Easy installation and easy operation. 8. Low investment and quick results. 4. Composition: Which company is better for the mineral processing spiral chute, Which is a good spiral chute for mineral processing? The spiral chute is composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar., 5、 This machine is suitable for separating iron ore, Ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum ore, niobium ore and other non-ferrous metals, rare mineral metals or non-ferrous metal minerals with different density and specific gravity from small Granularity of 0.3-0.02MM. Which is the best spiral chute for mineral processing? Which is the best spiral chute for mineral processing

Which is the best spiral chute for mineral processing