1 m3 spiral chute processing capacity

1 m3 spiral chute processing capacity

1. Introduction to the equipment for the processing capacity of a 1 meter spiral chute. A 1 meter spiral chute with a processing capacity of 1.3 meters is a heavy sorting machine used for mineral mortar to achieve lightweight and heavy mineral sorting due to the inertial centrifugal force that occurs during the rotary spiral movement. 2、 Tips for using spiral chutes. Pay attention to setting up the fiberglass spiral chutes, aligning them with the vertical line, using iron frames or wood to fix them in the appropriate orientation. The sand pump will deliver the mineral sand to the top two feeding ports of the spiral, blending it with supplementary water, and adjusting the concentration of the mineral slurry. The mineral sand slurry will naturally swirl from high to low, generating a single inertial centrifugal force in the rotating inclined flow rate, which varies in the specific gravity, particle size, and shape of the mineral sand, Through the influence of the gravity and centrifugal force of the swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. 1 m3 spiral chute processing capacity. 3、 Features This product is suitable for separating 0.3-0.02mm fine materials to obtain iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different densities and specific gravity. This equipment also has stable and easy to operate selection processes, a wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, strong processing ability, easy installation, easy operation, low investment, and quick effectiveness. 1 meter spiral chute with a processing capacity of . 4. Structural composition. The fiberglass spiral chute with a processing capacity of 1 meter and 3 meters is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, a product selection trough, an equipment gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The rotating groove has a pre designed durable and wear-resistant layer on the selected surface. She has the advantages of lightweight, solid, and durable use of consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer above it to screen the ore, which is also easy to operate. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mineral mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new equipment cutting groove, allowing other new products to be selected and classified into three (or four) categories according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multi-directional mineral flow. The transverse section of the spiral chute has a slope change, which is particularly suitable for the sorting of fine-grained materials. 5、 Adopting the design of spiral chute beneficiation in the field. The spiral concentrator is suitable for processing 0.6-0.03MM and vein ores and minerals, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, bay and riverside ore and placer gold. 1 meter 3 spiral chute processing capacity 1 meter 3 spiral chute processing capacity

1 m3 spiral chute processing capacity