Spiral chute sorting mica

Spiral chute sorting mica. 1、 Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic minerals due to its small environmental pollution and low cost. The fiberglass chute is one of the gravity separation equipment, with a structural feature of a cubic parabolic cross-section, suitable for handling finer particle sizes of -0.2mm. During the sorting step, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the bottom of the chute. 2、 Use skills to set up the FRP spiral chute, calibrate the vertical line, fix the iron frame or wood at the proper position, send the ore sand to the two ore inlets above the spiral by the sand pump, add make-up water, adjust the density of the mineral mortar, the mineral slurry naturally swirls from high to low, and a continuous centrifugal force occurs in the flow speed of the swirling inclined surface to obtain the difference in gravity, Granularity and shape of the ore sand, By achieving the effects of gravity and centrifugal force through swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Spiral chute is a spiral separator. spiral chute is used to separate mica from two-way spiral chute, and spiral chute is used to separate mica. 3. Special features This machine is suitable for separating fine materials with a particle size of 0.3-0.02MM to obtain iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate, tungsten ore, sand tin, tantalite, niobium ore, and other non-ferrous metals, rare ore metals and non-metallic mineral bodies with gravity differences. This machine also has advantages such as stable selection steps, easy operation, wide range of allowable changes in feed density, high enrichment ratio, high recovery rate, small footprint, low water consumption, simple structure, no need for power, large processing capacity, easy installation, easy operation, low investment, and fast efficiency. Spiral chute selection mica 4. The structure adopts the function of spiral chute. The fiberglass spiral chute consists of six parts: a feeding distributor, a feeding trough, a spiral trough, an equipment selection trough, a product gathering hopper, and a trough bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating pieces is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together through screws. The sorting surface of the spiral groove has a pre designed durable and wear-resistant layer. He also has the advantages of lightweight, sturdy, and durable consumables. A multi tube ore feeding homogenizer is installed above the rotating groove to screen minerals, which is also easy to operate. The screening machine is freely placed on the cross (or tripod) of the support table. The uniform mineral mortar is slowly fed onto the rotating groove surface through the feeding groove on the spiral groove head for selection. The bottom of the spiral groove is installed in a valve block type new equipment cutting groove, and the sorted new products are divided into three (or four) types of new products along the radial direction according to grade. Change the selected width of each new equipment by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to be gathered and exported separately. The change in the slope of the cross-section and curve of the fiberglass chute is particularly applicable for the selection of fine-grained mineral materials. What kind of mineral is selected for spiral chutes? 5. Scope of use: Fiberglass spiral chutes are suitable for processing 0.6-0.03 millimeters or vein ores and minerals, but high mud content is unfavorable for sorting. At present, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, coastal and river placers, and placer gold mines. Spiral chute sorting mica Spiral chute sorting mica