2000 spiral chute gold tailings selection video

2000 spiral chute gold tailings selection video

Video 1 of the 2000 type spiral chute gold tailings sorting: Describing the steps of mineral sorting in the chute, which belongs to the inclined flow sorting process. Mineral mortar is provided on a partially inclined inclined chute or slope. With the assistance of flowing water, the mineral particle group is not tight and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After being connected, concentrate and tailings can be obtained., Spiral chutes are machinery for mining and beneficiation, especially ideal for mineral mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of ore, high yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume and density, Granularity, and grade., 2000 type spiral chute gold tailings selection video 2. Operation principle: The fiberglass chute separator does not need to be placed on a cross (or triangular frame) on a support table without restriction. The same mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head end of the spiral groove, and sorting is carried out. The bottom is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that converges and induces the obtained variable mineral flows. The transverse section of the fiberglass spiral chute and the change in slope of the curve are extremely suitable for the selection of fine particle materials. Video 3: Characteristics of Type 2000 Spiral Chute Gold Tailings Selection. This machine is applicable to the separation of fine and small materials with a particle size of 0.3-0.02mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite, zircon, Rutile ore, monazite ore, phosphate ore, tungsten ore sand, tin, tantalum niobium ore, niobium and other non-ferrous gold ores, rare ore metals or non-metallic mineral bodies with density and specific gravity differences. This product has the advantages of stable and simple selection process, wide range of ore concentration tolerance, high enrichment ratio, high recovery probability, small land area occupation, low water consumption, simple structure, no power, large processing capacity, simplified installation, simple operation, small investment, and quick results. 2000 type spiral chute gold tailings selection video 4. Structural composition. The fiberglass spiral chute is composed of six parts, including a feeding homogenizer, a feeding chute, a rotating chute, a product selection chute, an equipment gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The rotating groove has a pre designed durable and wear-resistant layer on the selected surface. She has the advantages of lightweight, solid, and durable use of consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer above it to screen the ore, which is also easy to operate. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mineral mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new equipment cutting groove, allowing other new products to be selected and classified into three (or four) categories according to grade along the radial direction. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multi-directional mineral flow. The transverse section of the spiral chute has a slope change, which is particularly suitable for the sorting of fine-grained materials. 5、 Scope of application. Fiberglass spiral chute is suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite, cassiterite, tantalum niobium ore, gold ore, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and non-metallic mineral materials with sufficient specific gravity difference. 2000 type spiral chute gold tailings video @ @ 0002000 type spiral chute gold tailings video

2000 spiral chute gold tailings selection video