Is a spiral chute better or a rocking bed better

Is a spiral chute better or a rocking bed better

Is a spiral chute better or a rocking bed better. 1、 Product Overview: A gravity beneficiation machine that utilizes the continuous centrifugal force that occurs during the spiral rotation movement of mineral pulp to concentrate lightweight and heavy minerals. 2、 Production principles. Homogeneous mortar is slowly fed onto the rotating groove surface through the feeding groove installed at the beginning of the spiral groove, and selection is carried out. The tail end of the spiral groove is equipped with a valve block type equipment to cut the groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each equipment, the product gathering hopper will merge and export the obtained multi head ore flow differently. The transverse plane and curve slope of the fiberglass spiral chute are different, especially suitable for the selection of small particle materials. Is it better to use a spiral chute or a shaker at the rate of ? Thirdly, its characteristics. This machine is applicable to sorting iron, ferrotitanium, ferrochrome, pyrite, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum, niobium and other nonferrous metals, rare mineral metals and non nonferrous gold ore bodies with specific gravity of 0.3-0.02mm fine materials. This equipment has advantages such as stable sorting steps, easy control, wide range of allowable changes in ore concentration, very high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, large processing output, simple installation, convenient operation, small investment, and quick results. Is a spiral chute good or a shaking table good? @ @ 000 4. According to the particle size of the processed ore, the chute can be divided into three types:. (1) Coarse grained chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) Slurry spiral chute, feeding particle size ＜ 0.074 mm. 5、 Applicable. This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile, monazite, phosgenite, wolframite, cassiterite, tantalum, niobium and other nonferrous metals, rare mineral metals and nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. Is the spiral chute good or the rocking bed good? Is the spiral chute good or the rocking bed good

Is a spiral chute better or a rocking bed better