Spiral Chute Machine Video

Spiral Chute Machine Video 1: Introduction. Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic minerals due to its small environmental pollution and low cost. The fiberglass chute is one of the gravity separation equipment, with a structural feature of a cubic parabolic cross-section, suitable for handling finer particle sizes of -0.2mm. In the sorting step, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the bottom of the chute. 2、 Use the method to erect the spiral chute, calibrate the vertical line, use an iron frame or wood to set a suitable position, use the mortar pump to send the sand ore to the two feeding ports above the spiral, enter the increased water, adjust the density of the mineral slurry, the mineral mortar naturally swirls from high to low, and a coherent centrifugal force occurs in the flow speed of the whirling inclined surface, and the gravity, Granularity and morphology of the sand ore are different, The efficiency is obtained by the gravity and centrifugal force of the swirling flow, which separates the ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and moved to the sand tank through pipelines. Then, they are discharged by a sand pump, completing the entire beneficiation process. Spiral Chute Machine Video Reproduction Point Type Spiral Chute Price. 3、 Features and highlights: 1. Large scale, high output, and the objective conditions for contemporary mineral processing are to use scale effects to create benefits. 2. Fine granulation refers to the treatment of fine-grained minerals, especially for mineral materials with a particle size of -0.047mm. Originally, the machine could generally ensure the recovery of a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple use of gravity and water flow blocking force to composite and applicable centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals or the separation of fine or micro particles can be increased, thereby improving the recovery rate of mineral materials. 4. Based on energy conservation, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. Spiral Chute Machine Video Benefits of Using Spiral Chutes. 4、 The structural composition of the fiberglass chute is composed of six parts, including a feeding homogenizer, a feeding chute, a spiral groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and connected together through screws. The selected surface of the spiral groove has a pre made durable wear-resistant layer. It also has the advantages of lightweight, sturdy, and long-lasting consumables. The rotating groove is equipped with a multi tube feeding homogenizer for ore separation, which is simple and convenient to control. The mineral screening device does not need to be placed on a cross (or tripod) on a support table. The evenly distributed slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is equipped with a valve type new product selection groove, which allows other new products to be divided into three types (or four types) of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that densely exports the intercepted variable mineral flows. The transverse surface of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine particle materials. 5、 How much is the cost per spiral chute for mineral processing in the application field. The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin ore, tantalum niobium ore, placer gold, coal mine, monazite, Rutile, zircon sand, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Spiral Chute Machine Video Spiral Chute Machine Video