Spiral chute iron removal

Spiral chute iron removal 1. Equipment description. A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the spiral rotation movement of mineral slurry to achieve lightweight and heavy mineral separation. 2、 Technical principles. The uniform slurry is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove for sorting. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. Spiral chute for iron removal. 3、 Due to low power consumption, simple structure, small area occupied, simple operation, stable beneficiation, clear screening minerals, no need for moving parts, easy maintenance and management, large production capacity per unit area and other characteristics, special FRP chutes are particularly concerned in many gravity beneficiation equipment. The machinery has a relatively wide and stable groove surface, and the area where mortar flows in a laminar flow is larger, making it more suitable for processing medium to fine (-4MM) sized ores. We have produced spiral concentrators with diameters of 400, 600, 900, and 1200 millimeters domestically, Ф The output of 1200mm four heads is approximately 4-6 tons per hour. Spiral chute iron removal . 4、 The structure of the fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre designed durable wear-resistant layer. He also has the advantages of lightweight, sturdy, durable and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to screen the ore evenly, making it easy to control. The ore separator is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove by the feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is installed in a valve type new equipment to obtain the groove, allowing the sorted new products to be divided into three categories (or four categories) along the radial direction according to the grade of the new equipment. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that densely leads out the selected multi head ore flow. The horizontal plane of the spiral concentrator, with a change in the slope of the curve, is particularly suitable for the separation of fine particle materials. 5、 The equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, tungsten ore sand, tin ore, tantalite, niobium and other nonferrous metals, rare mineral metals and non nonferrous metal minerals due to the gravity difference of 0.3-0.02mm Granularity. Spiral chute iron removal Spiral chute iron removal