Tin tungsten ore gravity separation equipment

Tin tungsten ore gravity separation equipment

Tin and tungsten are two important metal minerals that are widely used in various industries, such as electronics, military, aviation, aerospace, etc. Tin tungsten ore refers to ore containing tin and tungsten. Due to its importance, the mining and utilization of tin tungsten ore has always been a hot topic in the mining industry. In the processing of tin tungsten ore, gravity separation equipment is one of the essential equipment. This article will introduce the working principle, operating steps, and maintenance methods of the tin tungsten ore gravity separation equipment.

1、 Working principle

Tin tungsten ore gravity separation equipment is a device used to separate useful minerals and waste rocks from tin tungsten ore. Its working principle is to separate ores using mechanical principles such as gravity, buoyancy, inertia, and electromagnetism. The tin tungsten ore gravity separation equipment mainly consists of a feeding trough, a vibrating feeder, a screening machine, a spiral classifier, a magnetic separator, a flotation machine, etc. After the ore enters the feed chute, it is evenly distributed to the screening machine through a vibrating feeder. The screening machine divides the ore into different particle sizes and then feeds it into a spiral classifier, which divides the ore into different levels according to density. Next, the magnetic separator performs magnetic separation on the ore, separating the magnetic minerals from it. Finally, the flotation machine floats the ore, separating useful minerals from waste rocks.

2、 Operating Steps

1. Check before startup

Before using the tin tungsten ore gravity separation equipment, a pre startup inspection is required. Check whether the equipment is normal, whether each part is loose or damaged, and whether the electrical circuit is connected properly.

2. Startup operation

Before starting up, it is necessary to connect the power plug of the device and then press the start button to start the device. During operation, it is necessary to pay attention to the operation of the equipment and promptly shut down for inspection if there are any abnormalities.

3. Shutdown operation

Before stopping, it is necessary to turn off the power supply of the equipment, and then press the stop button to stop the equipment from running. After shutdown, it is necessary to clean and maintain the equipment.

3、 Maintenance methods

1. Regularly inspect equipment

Tin tungsten ore gravity separation equipment requires regular inspection and maintenance. The inspection content includes the appearance of the equipment, electrical circuits, transmission parts, etc. If any problems are found, they need to be dealt with promptly.

2. Cleaning equipment

After using the tin tungsten ore gravity separation equipment, it is necessary to clean the equipment. The cleaning content includes cleaning the interior and exterior of the equipment, removing dust and debris from the equipment, etc.

3. Replace vulnerable parts

There are some vulnerable parts in the equipment for heavy separation of tin tungsten ore, such as screens, bearings, etc. After using the equipment for a period of time, these vulnerable parts need to be replaced to ensure the normal operation of the equipment.

4、 Summary

Tin tungsten ore gravity separation equipment is a device used to separate useful minerals and waste rocks from tin tungsten ore. Its working principle is to separate ores using mechanical principles such as gravity, buoyancy, inertia, and electromagnetism. When using tin tungsten ore gravity separation equipment, it is necessary to pay attention to the operating steps and maintenance methods of the equipment to ensure its normal operation.

Tin tungsten ore gravity separation equipment