Tungsten tin equipment jig

The tungsten tin equipment jig is an efficient welding equipment that can help welders quickly dispose of the waste generated during the welding process. During the welding process, waste is inevitable, and if not disposed of in a timely manner, it will have adverse effects on the welding process. Therefore, the use of tungsten tin equipment jigs is very important.

In this article, we will introduce the usage method and operating steps of the tungsten tin equipment jig to help everyone better use this equipment.

Basic structure of tungsten tin equipment jig

The tungsten tin equipment jig mainly consists of the following parts:

1. Filter: Used to filter the waste generated during the welding process.

2. Jig board: used to collect waste filtered out by the filter screen.

3. Jigging bucket: used to store the waste collected by the jigging board.

4. Motor: used to drive equipment operation.

2、 Usage method of tungsten tin equipment jig

1. Place the tungsten tin equipment jig on a stable ground to ensure that the equipment does not shake.

2. Insert the power cord of the device into the power socket and turn on the device's power switch.

3. Pour the waste from the welding equipment into the filter screen, and the waste from the welding equipment will be filtered out by the filter screen.

4. The waste filtered out by the filter will fall into the jig board. When the waste in the jig board accumulates to a certain extent, it is necessary to remove and clean the jig board.

When cleaning the jig board, it is necessary to first remove the jig board from the equipment and pour the waste from the jig board into the jig bucket.

6. After cleaning the jig board, put it back into the equipment.

7. After the welding work is completed, turn off the equipment power switch and unplug the equipment power cord from the power socket.

3、 Precautions

When using tungsten tin equipment jigs, it is necessary to pay attention to safety and avoid equipment shaking or tilting.

When cleaning the slag board, it is necessary to wear gloves to avoid being scratched by waste materials.

When cleaning the jig board, it is necessary to pour the waste from the jig board into the jig bucket to avoid the waste from falling onto the ground.

After cleaning the slag board, it is necessary to put it back into the equipment to ensure its normal operation.

In short, the tungsten tin equipment jig is a very practical welding equipment that can help welding workers quickly handle the waste generated during the welding process. When using the equipment, it is necessary to pay attention to safety and follow the operating steps to ensure the normal operation of the equipment.