Tin tungsten sand gravity separation production line

Tin tungsten sand gravity separation production line

Tin tungsten sand is an important metallic mineral resource widely used in fields such as aerospace, military, electronics, and chemical engineering. The tin tungsten sand gravity separation production line is one of the key equipment for tin tungsten sand processing, which is used for screening, gravity separation, desliming, and other treatments to improve the grade and recovery rate of tin tungsten sand. This article will introduce the operating steps and precautions of the tin tungsten sand gravity separation production line, to help readers better understand and apply the equipment.

1、 Working Principle of Tin Tungsten Sand Gravity Separation Production Line

The tin tungsten sand gravity separation production line is mainly composed of vibrating feeders, jaw crushers, ball mills, spiral classifiers, magnetic separators, flotation machines, dehydration machines, and other equipment. Its working principle is to send the original tin tungsten sand through a vibrating feeder to a jaw crusher for preliminary crushing, then to a ball mill for fine grinding, and then to a spiral classifier for screening. The minerals that meet the requirements are sent to a magnetic separator for magnetic separation to remove iron minerals, and then to a flotation machine for flotation. Finally, after dehydration treatment by a dewatering machine, high-grade tin tungsten concentrate is obtained.

2、 Operating Steps of Tin Tungsten Sand Gravity Separation Production Line

1. Preparation before startup

Before starting up, it is necessary to inspect and maintain the tin tungsten sand re selection production line to ensure the normal operation of the equipment. Specifically, it includes checking whether the electrical connections of each equipment are secure, cleaning up debris and accumulated water inside the equipment, and checking whether the lubricating oil and cooling water of the equipment are sufficient.

2. Startup operation

Before starting the machine, it is necessary to load the tin tungsten sand into the vibrating feeder, then turn on the power and start each equipment one by one according to the starting sequence of the equipment. During the startup process, it is necessary to pay attention to the operation of the equipment to ensure its normal operation. At the same time, it is necessary to adjust the feeding and discharging amounts of the equipment to ensure its stable operation.

3. Operations during the production process

During the production process of the tin tungsten sand gravity separation production line, it is necessary to regularly check the operation of the equipment, clean up debris and accumulated water inside the equipment, adjust the feeding and discharging amounts of the equipment, and ensure the stable operation of the equipment. At the same time, it is necessary to pay attention to the temperature of the equipment and the use of lubricating oil, and add lubricating oil and cooling water in a timely manner to ensure the normal operation of the equipment.

4. Shutdown operation

Before shutting down, it is necessary to turn off each equipment one by one. First, turn off the flotation machine and dehydration machine, and then turn off the magnetic separator, spiral classifier, ball mill, jaw crusher, and vibration feeder. At the same time, it is necessary to clean up debris and accumulated water inside the equipment, turn off the power, and carry out equipment maintenance and upkeep.

3、 Precautions for Tin Tungsten Sand Gravity Separation Production Line

When operating the tin tungsten sand re selection production line, it is necessary to wear protective equipment, such as safety helmets, gloves, masks, etc., to protect oneself.

2. During the operation process, it is necessary to regularly check the operation of the equipment, promptly identify and eliminate faults, to ensure the normal operation of the equipment.

During the production process, it is necessary to pay attention to the temperature of the equipment and the use of lubricating oil, and add lubricating oil and cooling water in a timely manner to ensure the normal operation of the equipment.

4. Before shutting down, it is necessary to clean up any debris and water inside the equipment, turn off the power, and carry out maintenance and upkeep of the equipment to extend its service life.

In summary, the tin tungsten sand gravity separation production line is one of the key equipment for tin tungsten sand processing, and its operating steps and precautions are of great significance for improving the grade and recovery rate of tin tungsten sand. Therefore, we should carefully study and apply the tin tungsten sand gravity separation production line to better play its role and contribute to the development of the tin tungsten sand processing industry.

Tin tungsten sand gravity separation production line